Compare Products

2022 SCAG Power Equipment Cheetah II 61 in. Kawasaki 38.5 hp
2022 SCAG Power Equipment Cheetah II 61 in. Kawasaki 38.5 hp

Specs

General Information

Manufacturer
SCAG Power Equipment
SCAG Power Equipment
Model Year
2022
2022
Model
Cheetah II 61 in. Kawasaki 38.5 hp
Cheetah II 61 in. Kawasaki 38.5 hp
Model Code
SCZII-61RD-38FX-EFI
SCZII-61RD-38FX-EFI
Color
Orange
Orange

Body

Seat
4-point iso-mounted mid-back mounted on operator-suspension platform
4-point iso-mounted mid-back mounted on operator-suspension platform

Drivetrain

Drive System
Hydro-Gear ZT5400 Transaxle. Two-Speed
Hydro-Gear ZT5400 Transaxle. Two-Speed
Travel Speed Forward

High-speed - 16 mph

Low-speed - 12 mph

High-speed - 16 mph

Low-speed - 12 mph

Travel Speed Reverse

High-speed - 8 mph

Low-speed - 5 mph

High-speed - 8 mph

Low-speed - 5 mph

Wheel Motors
Internal Motor - 21 cc
Internal Motor - 21 cc
Drive Tires
24 x 12-12 in.
24 x 12-12 in.
Steering Tires
Caster - 13 x 6.5-6 in.
Caster - 13 x 6.5-6 in.
Parking Brake
Foot-operated pedal
Foot-operated pedal

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FX EFI
FX EFI
Horsepower
38.5 hp
38.5 hp
Fuel System
Electronic fuel injection
Electronic fuel injection
Fuel Capacity
13 gal.
13 gal.

Hydraulics

Pump Type
Internal Pump: 16 cc
Internal Pump: 16 cc

Measurements

Length
85.5 in.
85.5 in.
Width

Chute down - 73.5 in.

Chute in transport position - 62.75 in.

Chute down - 73.5 in.

Chute in transport position - 62.75 in.

Height

ROPS folded - 49.5 in.

ROPS up - 67 in.

ROPS folded - 49.5 in.

ROPS up - 67 in.

Weight
1,364-1,392 lb.
1,364-1,392 lb.
Cutting Width
61 in.
61 in.
Cutting Height
1.25 to 5 in. in 0.25 in. increments
1.25 to 5 in. in 0.25 in. increments

Operational

Deck Construction
Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2 in. of steel. Reinforcement plates at cutter deck spindles
Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2 in. of steel. Reinforcement plates at cutter deck spindles
Deck Type
Velocity Plus™ Rear Discharge Cutter
Velocity Plus™ Rear Discharge Cutter
Deck Lift
Adjustable foot-operated pedal
Adjustable foot-operated pedal
Deck Discharge
Rear Cutter
Rear Cutter
Spindles
Cast-iron housing with tapered roller bearings
Cast-iron housing with tapered roller bearings
Blade Brake Clutch
Ogura GT5 (350 ft. lb.) Adjustable air-gap for extended life
Ogura GT5 (350 ft. lb.) Adjustable air-gap for extended life

Features

Features

  • VELOCITY PLUS CUTTER DECKS - 61" CUTTING WIDTH: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
  • OGURA PTO CLUTCH BRAKE - STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE: The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
  • HEAVY-DUTY, DOUBLE-TUBE STEEL MAIN FRAME - SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE: The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
  • HYDRO-GEAR ZT-5400 TRANSAXLES - SPEEDS UP TO 16 MPH!: Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle’s design greatly reduces hoses and possible leak points.
  • EASE OF MAINTENANCE - MORE UPTIME: Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
  • CHEETAH II OPERATOR SUSPENSION SYSTEM - UNPARALLELED COMFORT: With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it’s needed, and only where it’s needed. The seat’s 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
  • TIGER EYE ADVANCED MONITORING SYSTEM - KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
  • 12-VOLT OUTLET - KEEP YOUR DEVICE CHARGED AND READY: 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.

Features

  • VELOCITY PLUS CUTTER DECKS - 61" CUTTING WIDTH: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
  • OGURA PTO CLUTCH BRAKE - STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE: The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
  • HEAVY-DUTY, DOUBLE-TUBE STEEL MAIN FRAME - SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE: The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
  • HYDRO-GEAR ZT-5400 TRANSAXLES - SPEEDS UP TO 16 MPH!: Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle’s design greatly reduces hoses and possible leak points.
  • EASE OF MAINTENANCE - MORE UPTIME: Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
  • CHEETAH II OPERATOR SUSPENSION SYSTEM - UNPARALLELED COMFORT: With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it’s needed, and only where it’s needed. The seat’s 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
  • TIGER EYE ADVANCED MONITORING SYSTEM - KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
  • 12-VOLT OUTLET - KEEP YOUR DEVICE CHARGED AND READY: 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.